ODU Homepage

Department of Civil and Environmental Engineering (CEE) Kaufman Hall Room 135 Frank Batten College of Engineering and Technology Old Dominion University Norfolk, Virginia 23529-0241, USA Tel) (757) 683-3753 Fax) (757) 683-5354

 

 



CONTENTS



 




  • The users (students and/or instructors) can use this module to create 2-D
    truss, beam and/or frame structural problems, and obtain the structural responses (such
    as joint displacements, support reactions, member-end-actions etc...).
  • Various ICONS are created (with proper explanation to users), so that users can conveniently define the structural problems and obtain the solutions.
  • Remarks:  Detailed demonstrations on how to create a structural problem,
    and obtain its solution are illustrated by clicking at any of the 3 demonstrated modules
    (Demo Module-I, Demo Module-II and Demo Module-III).
  • Note: In order to use this module, use UIN : -1234567 and click ENTER

 

Acknowledgement and Disclaimer

“This material, jointly developed by Duc T. Nguyen and Ahmed Ali Mohammed is based upon the work supported by the National Science Foundation under Grant No. 0530365.”

“Any opinions, findings, and conclusions or recommendations expressed in this material are those
of the author(s) and do not necessarily reflect the views of the National Science Foundation”

Copyright Reserved by Duc T. Nguyen and Ahmed Ali Mohammed
CEE Engr. Dept Old Dominion University, Norfolk, VA-23529.