EET
330 - -
Errata Sheet for
Operational Amplifiers
with Linear Integrated Circuits
Fourth Edition - -
By William D. Stanley
Last updated 06/25/17
| Chapter 5 Errata | ||
| Pg. 213--4th line of 2nd para | Equation read: vd = v1-v2" vice "vi-v2" |
|
| Pg. 229--The top of page heading |
Should read ac INTEGRATOR vice ac INTEGRATORD |
|
| Pg. 243--1st line of 2nd para |
Should read: "...from (5-104)" vice "from (5-102)" |
|
| Pg. 244, Figure 5-26 |
Should have the - and + signs on the opamp symbol. Inverting input on top. |
|
| Pg. 248--1st line of 2nd para | Should be inverting vice non-inverting | |
Pg. 245--Example 5-11 part (c) Equation (5-110)
|
56.45 should be 56.485 and -112.9 should be -112.97 |
|
| Chapter 6 Errata | ||
| Problem set, pages 294-302 | Whenever the problem points to Figures 6-20 and 6-21, it means 6-26 and 6-27 | |
| Pg. 274--Fig. 6-6b | The x-axis should have "Vref" where the waveform crosses it. | |
| Pg. 279--2nd para of Ex 6-4 |
Should read:"...negative voltage is applied through the voltage divider circuit to the non-inverting input." |
|
| Pg. 279--eqn. 6-11 |
Answer should be -3 and the 15 should be -15 |
|
| Pg. 294--Under Note for Drill Problems | Replace Figure 6-20 and Figure 6-21 by Figure 6-26 and Figure 6-27 | |
| Pg. 295--Problems 6-1 and 2 | Replace 6-20 by 6-26 | |
| Pg. 295--Problems 6-3 and 4 | Replace 6-21 by 6-27 | |
| Pg. 296--Problems 6-5, 6, and 9 | Replace 6-20 by 6-26 | |
| Pg. 296--Problems 6-7, and 8 | Replace 6-21 by 6-27 | |
| Pg. 297--Problem 6-10 | Replace 6-20 by 6-26 | |
| Pg. 297--Problems 6-11, 12, 13, and 14 | Replace 6-21 by 6-27 | |
| Pg. 298--Problems 6-15, and 17 | Replace 6-20 by 6-26 | |
| Pg. 298--Problems 6-16 and 18 | Replace 6-21 by 6-27 | |
| Pg. 299--Problem 6-19 | Replace 6-20 by 6-26 | |
| Pg. 299--Problem 6-20 | Replace 6-21 by 6-27 | |