EET
330 - -
Errata Sheet for
Operational Amplifiers
with Linear Integrated Circuits
Fourth Edition - -
By William D. Stanley
Last updated 08/03/03
| Chapter 7 Errata | |
| Pg 309 --last sentence | "Output" is misspelled. Add the missing "t"' |
| Pg 315 --2nd row of Table 7-1 | The 2nd row is missing the state ID, 'B' |
| Pg 320 -- 4th line, 1st para | Tau = RB C should read Tau sub L = RB C in the same manner as Tau sub H in the 1st line. |
| Pg 324 --1st line of Ex 7-4 | Spelling error. "product" should be "produce" |
| Pg. 325 -- Figure 7-15 | Pin 1 is missing. Place it on bottom of the timer and connect it to Ground. |
| P326 - - Example 7-7 | Last line of example should have subscript i for both R and C. |
| P329 - - Page heading | Should read "7-5 Square/Triangle Wave Function Generator" |
| P338 - - Example 7-11 | Change R1 to Ri in equation 7-80. |
| P338 - - Example 7-11 | The pi is missing from the numeric portion of equation 7-79. The answer is correct. |
| Pg. 351 -- Figure P7-7 | Pin 1 should be grounded, pin 4 (reset) and pin 8 (Vcc) at top should be labeled where they connect to Vcc. |
| Pg. 352 -- Figure P7-9 | The ground symbol on both amps isn't drawn correctly |
| Pg. 352 -- Figure P7-11 | The All-pass phase-shift network contents should be 1 at an angle of theta vice 1 at an angle of 0 degrees. |
| Pg. 353 -- Figure P7-13 | The bottom ground symbol isn't drawn correctly |
| Pg. 357 -- Figure P7-41 | The ground symbol is missing from the cap and the bottom of R1. |